Table of Contents
Advertisement
Control Window
Control window appears when user opens a device. This window contains all the functionality
to control the Onyx I²C/SPI Adapter.
Figure 14: Control window
Device Information
Device information is shown in the upper left corner of the control window. User can check
the connected device's description, ID and serial number.
Selecting Operation Mode
Right next to the device information there is a control for selecting the operation mode. There
are four operation modes of Onyx I²C/SPI Adapter, which are I²C/SPI, I²C/GPIO, SPI/GPIO and
GPIO modes.
Figure 15: Selecting operation mode
DE4001_USER MANUAL
Rev. No:0 Rev. Date: 05.08.2023
www.deico.com.tr
11 / 31
Advertisement
Table of Contents
