Saved Settings And Log Messages; Compatibility; Windows; Linux - DEICO ONYX DE4001 User Manual

Saved Settings and Log Messages

We previously discussed that settings and log messages are saved into files. Saved files are
located at the user's %AppData% path, which is something like:
"C:\Users\user.name\AppData\Roaming\Onyx I²C-SPI Adapter"
There are two folders in this directory, session logs and settings. In the settings directory:
 Operation mode
 I²C configurations and message data
 SPI configurations and message data
 GPIO configurations of last session
are saved as ".xml" files
Session logs contain the log messages. Log file names are created by date. Maximum 5 files
are created for logs.

COMPATIBILITY

Windows

Currently, Onyx Controller can run on 64-bit version of Windows. 32-bit version compatibility
will be provided in the future.

Linux

Linux compatibility will be available in the future.
DE4001_USER MANUAL
Rev. No:0 Rev. Date: 05.08.2023
Figure 34: Settings files
Figure 35: Log files
www.deico.com.tr 25 / 31