Set Bit Rate; Master Write Operation - DEICO ONYX DE4001 User Manual

Set Bit Rate

To set the bit rate, user can select the desired bit rate and click on the "Set" button.
Operational bit rates are currently 100kHz, 400kHz and 1MHz.
Note Application saves the set bit rate to a settings file, see
Messages" for settings. However, these settings are saved to file only, if user resets
the device or powers off, bit rate must be set again to operate at the desired speed.
Note Set bit rate works for master operations only.

Master Write Operation

DE4001_USER MANUAL
Rev. No:0 Rev. Date: 05.08.2023
Figure 17: I²C master - Set bit rate
Slave address
Message area
Utility operations
Figure 18: I²C master - Write operation
www.deico.com.tr
"Saved Settings and Log
Write button
13 / 31