Advertisement
Quick Links
Technical Support and E-Warranty Certificate www.vevor.com/support
ICE SHAVER
INSTRUCTION MANUAL
MODEL:BY-300XTD-S
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Related Manuals for VEVOR BY-300XTD-S
Summary of Contents for VEVOR BY-300XTD-S
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support ICE SHAVER INSTRUCTION MANUAL MODEL:BY-300XTD-S We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
- Page 3 CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
- Page 4 Symbol Symbol Description Warning - To reduce the risk of injury, user must read instructions manual carefully. This symbol, placed before a safety comment, indicates a kind of precaution, warning, or danger. Ignoring this warning may lead to an accident. To reduce the risk of injury, fire, or electrocution, please always follow the recommendation shown below.
- Page 5 Important Assurance WARNING: Before operating this device, please read this instruction manual completely and keep it handy for future reference. Always follow basic safety precautions when using these devices. These include: READ All OPERATING INSTRUCTIONS AND PRODUCT SAFETY LABELS! FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE! CHECK FOR DAMAGED PARTS: Before using the machine, check whether all parts work normally and perform the expected functions.
- Page 6 11. Place the machine on a firm and stable surface. Ensure that the machine is not placed near the edge of the worktop, where it can be easily pushed off or f all. 12. Always protect the power cable from undue flexing and wearing – do not allow the cable to hang off edge of the counter or table. 13. To reduce the risk of unintentional starting, check that the control is OFF befor e plugging the cord into wall outlet. Turn the controller off to disconnect, then remove the plug from the wall outlet. 14.
-
Page 7: Technical Parameter
SAVE THESE INSTRUCTION! Rough Diagram Handle assembly 1.Place the handle on the top. 2.Screw them together. Accessories Handle*1 Screw*4 Screw drive*1 Ice shovel*1 basin*1 Technical Parameter Ratings Capacity Size AC120V/60Hz 300W 2.6A L*W*H： ≥250KG/H 575x310x480mm AC220-240V 50/60Hz 350W - 5 -... - Page 8 Operation Instructions 1. Install the ice shaver like as below 2. Find a flat location for the appliance where it’s protected from direct sunlight and other heat sources (i.e., stove, furnace, radiator). Place the appliance on a level surface. Ensure at least 15cm of space between the back and sides of the appliance and the wall.
-
Page 9: Clean And Maintenance
This machine can only be used to shave ice. This machine is suitable for shaving small ice cubes with a side length of no more than 2-3CM. Large ice cubes may cause the machine to jam or even burn out the motor. WARNING: The blade is very SHARP and operates with care. - Page 10 5.Crushed Ice container cleaning (after each use) Immerse the container in a mixture of neutral detergent and water for at least 3 minutes, then rinse with water and dry. 6.The blade belongs to the natural wear part of the equipment. After cutting a certain time and quantity of ingredients, the blade will be worn.
- Page 12 Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the BY-300XTD-S and is the answer not in the manual?
Questions and answers
How do I change blades on BY-300XTD