Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support ICE MAKER INSTRUCTION MANUAL MODEL: IMN1000-UL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Page 3
CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 4
Read this manual thoroughly before using and save it for future reference. IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, explosion, electric shock, or injury when using your ice maker, follow these important safety instructions: 1. Before using, check that the voltage power corresponds to the one shown on the appliance nameplate.
Page 5
10. Place power cord in such a way it cannot be pulled on by children or cause a tripping hazard. 11. Place power cord in such a way that it is not in contact with hot surfaces. 12. The use of attachment not recommended or sold by manufacturer may cause fire, electric shock or injury.
Page 6
children. 30. Do not leave the appliance unattended while in use. 31. Do not use the appliance for other than intended use. 32. Do not use outdoors. 33. Please abandon the ice maker according to local regulations as it uses flammable blowing gas and refrigerant.
(Product may be subject to change without prior notice) CONTROL PANEL Key/Indicator Function Start or stop the appliance. “Clean” key. The “Ice-making” indicator will light solidly when the appliance is making ice. lights solidly The “Clean” indicator will light solidly when the appliance is performing cleaning.
The “Ice full” indicator will light solidly when the ice basket is full. lights solidly lights solidly, Defrosting indication. The appliance is defrosting. flashes flashes Freeze indication. Unable to operate, waiting for automation frost. flashes BEFORE FIRST USE 1. Unpack the appliance, then check and make sure that all the accessories, including the ice basket and ice scoop, etc., are complete.
6. Do not use the appliance in a cold environment (lower than 5℃). 7. Clean the appliance by following the operation of “ CLEANING AND MAINTENANCE” before operate. USING YOUR ICE MAKER 1. Ensure that the drain plug at the back of ice maker is closed well. 2.
Page 10
the appliance. 10. The “ ” indicator flashes, it indicates the need for automatic/manual water refill. a.With automatic water filling function of the machine, at this time the prototype has automatically started to fill the water to resume ice production on its own, (waiting time of about 3.5 minutes);...
shown in the section of “CLEANING AND MAINTENANCE” (see Fig.1) if you want to add the function of refilling water automatically. CLEANING AND MAINTENANCE To keep your ice tasting fresh and your ice maker looking great, we recommend cleaning your ice maker at least once per week. 1.
9. Please empty the water reservoir and dry it for storage if the ice maker is not used for a long time. Fig.1 TROUBLESHOOTING Problem Possible causes Solution 1.Stop making ice, refill water 1.Be lack of water. and then press “ON/OFF” key 2.The water screen at to restart ice-making cycle.
Page 13
1.Remove the ice from ice basket and then press “ON/OFF” key to restart the 1. Ice basket is full. ice-making cycle. 2. Malfunction of 2.The sensor is damaged, infrared ray. please send it to the lights up authorized department for repair.
Need help?
Do you have a question about the IMN1000-UL and is the answer not in the manual?
Questions and answers