Step 1 Installing The Software; Starting The Install Program - Contec PIO-32H(PCI)H User Manual

Step 1 Installing the Software

This section describes how to install the Driver libraries.
Before installing the hardware on your PC, install the Driver libraries from the bundled
API-PAC(W32) CD-ROM.
The following description assumes the operating system as Windows XP. Although some user
interfaces are different depending on the OS used, the basic procedure is the same.

Starting the Install Program

(1) Load the CD-ROM [API-PAC(W32)] on your PC.
(2) The API-PAC(W32) Installer window appears automatically.
If the panel does not appear, run (CD-ROM drive letter):\AUTORUN.exe.
(3) Click on the [Install the drivers] button.
Before installing the software in Windows XP, 2000, or NT, log in as a user with administrator
privileges.
PIO-32/32H(PCI)H
2. Setup