Subscribe to Our Youtube Channel
Related Manuals for BED BATH & Beyond EMBRACE PRO
Summary of Contents for BED BATH & Beyond EMBRACE PRO
- Page 1 EMBRACE PRO E R G O N O M I C C H A I R ( C U S H I O N ) U S E R M AN U AL & INS TALL ATIO N G UID E...
- Page 2 WARNING Failure to follow these instructions may result in serious injury. This product is designed for sitting only. Do not stand on the seat. Do not use this product unless all bolts and parts are firmly tightened. If any parts are missing, damaged or worn, repair the product with the replacement parts from manufacturer.
- Page 3 ASSEMBLY STEP 1. STEP 2. Flip the base upside down and insert the Insert the gas lift into the base. castors into the base. STEP 3. STEP 4. Tighten the aligned bolts and washers into Push the handle and the mechanism holes on the base using a screwdriver.
- Page 4 ASSEMBLY STEP 5. STEP 6. Keep the holes in the metal bar in line with Place two bolts and corresponding washers Align and tighten the bolts, spring lock Tighten another two screws in the metal bar. the plywood before assembling the back, into the chair and tighten.
- Page 5 ASSEMBLY STEP 9. STEP 10. Lower the seat on to the gas lift Place the headrest at the top of the seat back Place the headrest at the top of the seat back. FUNCTION GUIDE Adjust the headrest angle up Adjust the headrest height to 45 degrees.
- Page 6 FUNCTION GUIDE Press the tabs under the Armrest pad can slide back Armrest pad can rotate left armrests to adjust them up and forth. and right. and down. Pull the handle up to adjust the This handle controls angle of the seat height.
- Page 7 FUNCTION GUIDE Stretching the lower part of the back basket forward A is locked position. can reduce the height of B is unlocked position. the backrest 60mm front and back. Pushing the handle up allows the seat cushion to move forward up to 60mm.
- Page 8 FUNCTION GUIDE 90°-105° A is locked position. B is unlocked position. 60mm front and back. Pushing the handle up allows the seat cushion to move forward up to 60mm. When the wrench is pulled Release the handle and the seat is locked.
Need help?
Do you have a question about the EMBRACE PRO and is the answer not in the manual?
Questions and answers