Dynamic range control (DRC)
You can apply dynamic range control to
Dolby Digital tracks.
ON : Optimize the dynamic range
•
OFF : Turn off dynamic range
•
adjustment
» AUTO : Dynamic range is
automatically adjusted
» By default, the DRC mode is set
to AUTO.
Note
•
DRC is not available in USB/BT/Play-fi mode.
AV SYNC
Set the Audio Delay.
Video image processing, sometimes
longer than the time required to process
the audio signal. This is called "delayed."
Audio Delay feature is designed to
remedy this delay.
S 00 ~ S 200
•
» By default, the audio delay is set
to 00.
DIM
Set display brightness.
HIGH, MID, LOW
•
» By default, the dimmer is set to
MID.
DISPLAY
Set to turn off the display automatically
(except the Wi-Fi LED indicator) after 10
seconds of idle when no user operation.
ON: Set to display on
•
OFF: Set to display off
•
» By default, the display is set to
ON.
22 EN
Auto Standby
The unit automatically turns to Standby
mode after about 15 minutes if the TV or
the external unit is disconnected (or USB, BT
function bit playback pause), switched off.
STNBY IN 15M: Turn on the
•
Auto-Standby.
STNBY OFF: Turn off the Auto-
•
Standby.
» By default, the key tone is set to
ON.
Note
•
To switch the unit off completely, remove the
mains plug from the mains socket.
•
Please turn the unit off completely to save
energy when not in use.
Update firmware via USB
Check if there is the latest firmware
version on www.philips.com/support.
Search for your model and click on
"Software and drivers".
Copy the software update files into USB
flash drive, insert USB flash drive on the
unit.
» Press
> select "UPGRADE" >
"PLAY TO START"
» Then press
confirm.
» Upgrade finished and restart.
(Enter) button to