Contents 1 Important 4 Use your Soundbar Safety Turn ON and OFF Care for your product Auto Standby Care of the environment Select Modes Compliance Adjust the Volume Help and support Virtual Surround mode Caution FCC and IC statement for Factory Reset Users (USA and Canada only) Setup Menu...
1 Important Never connect the product to the power outlet if the voltage is different. Risk of injury or damage to this product! • For wall mounting, this product must Read and understand all instructions before be securely attached to the wall you use your product.
Directive 2014/53/EU. which can be recycled and reused. You can find the Declaration of Conformity on www.p4c.philips.com. This symbol on a product means that the product is covered by European Directive 2012/19/EU.
Increase the separation between the equipment and receiver. For extensive online support, visit • Connect the equipment into an outlet www.philips.com/support to: on a circuit different from that to • download the user manual and the which the receiver is connected.
Soundbar This section includes an overview of the main unit. Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your Soundbar at www.philips.com/support. What’s in the Box Check and identify the items in the package: •...
Display panel AC socket ~ Connect to the power supply. Power LED Wall bracket slot Wi-Fi LED indicator (Yellow) LED State Status Blink Wi-Fi Access Point (AP) mode Remote control Double blink Wi-Fi Protected Setup (WPS) mode Constant on Connected / Pairing successful This section includes an overview of the remote control.
the unit, it may operate incorrectly. +/- (Soundbar’s Volume) Conversely, the other products may Increase / decrease the soundbar’s operate incorrectly. volume. +/- (Subwoofer’s Volume) Increase / decrease the built-in First-time use: subwoofer’s volume. The unit has a pre- installed lithium CR2025 battery.
• Do not use any batteries other than Wall mount those specified. • Do not heat or disassemble batteries. • Never throw then in fire or water. Note • Do not carry or store batteries with other • Improper wall mounting may result in metallic objects.
Hang the Soundbar on the fastening screws. 3.5-4mm/0.14"-0.16" 4mm/ 0.16" >25mm/0.98"...
3 Connect On your TV, turn on HDMI-CEC operations. For details, see the TV user manual. • The HDMI ARC connector on the TV might be labeled differently. For This section helps you connect your details, see the TV user manual. Soundbar to a TV and other devices, and then set it up.
(such as iPad, iPhone, iPod touch, Android phones, etc.) to the same Wi-Fi network, you can then use the Philips Sound app powered by DTS Play-Fi to control the soundbar to listen to audio files. Connect your phone or tablet to the same Wi-Fi network that you want to connect your soundbar.
Do not unplug switched temporarily to Play-Fi device AP your speaker, turn off your device, or and restart Philips Sound APP to complete leave the network during the update. the product’s Wi-Fi setup. See the steps below: AirPlay setup •...
Press the WPS button on your router. The button is normally marked with this WPS logo. Follow the instruction in Philips Sound App powered by DTS Play-Fi to start the pairing. Note • WPS is not a standard feature on all routers.
4 Use your Select Modes Soundbar Press the button repeatedly on the unit or on the remote control to select the HDMI ARC, OPTICAL, AUX, USB, BT mode. » The selected mode will show on the This section helps you use the Soundbar to display.
• MOVIE: Create a surround listening Setup Menu experience. Ideal for watching movies. • MUSIC: Create two-channel or The unit allows you to configure advanced multichannel stereo sound. Ideal for settings to provide you with an even better listening to music. experience.
On the Bluetooth device, switch on Bluetooth, search for and select "Play-Fi » DIM 03, DIM 02, DIM 01. Device (xxxxxx)" to start connection (see » By default, the dimmer is set to DIM the user manual of the Bluetooth device on how to enable Bluetooth).
Insert the USB device. (Setting > PS Fine Tune) The firmware for MCU and DSP can be upgraded to the latest version via Philips Sound App powered DTS Play-Fi. Please go to settings menu and select PS Fine Tune option to check it out. If the upgrade is released, the upgraded icon can be pressed to proceed automatically.
Option 2: Update firmware via USB Check if there is the latest firmware version on www.philips.com/support. Search for your model and click on "Software and drivers". Download the firmware into a USB flash drive. Follow the instruction for the firmware...
If you still have a problem, up and that the device is not muted. get support at www.philips.com/support. • When the playback freezes and there is no sound in Wi-Fi mode, please check Main unit whether your home network is normal.
• When the first time set up is not successful, close the Philips Sound app powered by DTS Play-Fi. Restart the app. • When the speaker was set as Stereo...
Trademarks The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. For DTS patents, see http://patents.dts.com. Manufactured unde license from DTS, Ins. (for companies headquartered in the U.S./ Dolby, Dolby Audio, and the double-D Japan/Taiwan) or under license from DTS symbol are registered trademarks of Dolby Licensing Limited (for all other companies).
Specifications are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.