Connect To Wi-Fi (Wireless Operation) - Philips TAB8507 User Manual

Connect to Wi-Fi
(Wireless operation)
(For iOS and Android version)
By connecting this unit and mobile
phones, tablets (such as iPad, iPhone,
iPod touch, Android phones, etc.) to the
same Wi-Fi network, you can then use
the Philips Sound app powered by DTS
Play-fi to control the soundbar to listen
to audio files.
1
Download and install the Philips
Sound app powered by DTS Play-fi on
a phone or tablet.
Philips Sound
•
Make sure your router is turned on
and working properly.
Note
•
Depending on the device version, the operation
screen and the way to perform operations may
vary.
2
Connect your phone or tablet to the
same Wi-Fi network that you want to
connect your soundbar.
5
Wi-Fi
<
Wi-Fi
Return to this app to continue setup.
6
3
Ready?
Press and hold
Go To Wi-Fi Settings
located at the back cabinet for 8
16 EN
7
Wi-Fi Password
I
1234567890
Enter the password for the network
5
5
Return to this app to continue setup.
Return to this app to continue setup.
6
6
Ready?
Philips Sound
Ready?
Go To Wi-Fi Settings
7
Wi-Fi Password
7
I
1234567890
(Wi-Fi) button
1234567890
Enter the password for the network
PlayFiDevice 1234
Enter the password for the network
Show Password.
Your Play-Fi device is connecting to
X
Your Home Router
Your Home Router
4
5
5
Philips Sound
5
Return to this app to continue setup.
6
6
Ready?
PlayFiDevice 1234
Go To Wi-Fi Settings
Go To Wi-Fi Settings
Wi-Fi Password
7 Your Play-Fi device is connecting to
Wi-Fi Password
X
7
X
I
Your Home Router
1234567890 When the Wi-Fi light on the device stops
Your Home Router
blinking and becomes solid the device is
Show Password. Enter the password for the network setup and ready to be used.
Show Password.
seconds to trigger the Wi-Fi
connection
>8 seconds
» Until the speaker make a second
tone and then release the button
Two tone
Wait until the Wi-Fi light indicator on
the front cabinet goes from a fast blink
to a slow pulse. When it begins pulsing
slowly, it indicates that the speaker is
entering the Wi-Fi setup mode.
Fast blink
Launch the Philips Sound app
powered by DTS Play-fi. Follow the
instructions in the app to connect
this product to your Wi-Fi network.
5
Philips Sound
>8 seconds
Return to this app to continue setup.
6
Settings
Ready?
SETUP
PlayFiDevice 1234
Go To Wi-Fi Settings
Setup Play-Fi Device
7
Wi-Fi Password
Your Play-Fi device is connecting to
Your Home Router
Your Home Router
Your Home Router X
I
X
I
1234567890
When the Wi-Fi light on the device stops
Your Home Router
blinking and becomes solid the device is
Enter the password for the network Your Home Router
setup and ready to be used.
Show Password.
X X Select Name Select Name
Slow pulse
Philips Sound
Settings
Settings
Philips Sound
SETUP SETUP
Setup Play-Fi Device Setup Play-Fi Device
Return to this app to continue setup.
Ready?
Your Home Router
Your Home Router
Go To Wi-Fi Settings
PlayFiDevice 1234 PlayFiDevice 1234
X X
Select Name Select Name
X X Select Name Select Name
Wi-Fi Password
X
I
1234567890
Your Play-Fi device is connecting to
Bedroom
Your Play-Fi device is connecting to
Bedroom
Your Home Router
Enter the password for the network Your Home Router
Your Home Router
When the Wi-Fi light on the device stops
Show Password.
When the Wi-Fi light on the device stops
blinking and becomes solid the device is
blinking and becomes solid the device is
setup and ready to be used.
setup and ready to be used.
Philips S
Settin
SETUP
Setu
PlayF
Your
X X
Selec Selec
Your Play-
You
When the Wi
Bed
blinking and
setup a