NOTE
NOTE
Alternative mounting channels
maybe neccesary due to other
vehicle ancillaries (e.g. fuel
tank). These should provide
comparative strength to the
con guration shown.
NOTE
Taper washers should be
used if mounting channels
with tapered anges are to be
used.
4990140010 Date:03/15
Installation
No.
Description
1.
M16 stud (short)
2.
Short Spacer
3.
M16 Stud (long), Grade 8
4.
Long Spacer
5.
Mounting channels
6.
M16 Flanged Self locking nut, Grade 8
Figure 5. Mounting Details - separate ancillary packages
3.4
Lubrication
The XK12 is supplied complete with oil.
When the compressor has been mounted, the oil level should be re-checked
as shown in gure 6 and topped-up with oil through, and up to, the ll/level
plug hole (approximately 1.5 litres total if necessary).
Key
1 - Fill Plug washer
2 - Fill / Level Plug
3 - Plug Cap
4 - Drain Plug washer
Figure 6. Oil Lubrication Components
XK12 Installation, Operating & Maintenance Manual
XK12 Installation, Operating & Maintenance Manual
5 - Magnetic Drain Plug
Page 9
Page 9