Table of Contents
Advertisement
2
NOTE
The shape and size of
the compressor make it
particularly suitable for PTO/
prop. shaft driving inside
the vehicle chassis on most
applications.
4990140010 Date:03/15
General
2.1
Product general description
The XK12 is a robust, medium ow, oil free, contactless, low maintenance
screw compressor designed for the contaminant free discharge of dense
bulk powder products (e.g. cement, our and lime), usually at 1.5-2.5 bar g
pressure in 3" pipework.
The machine is generally comprised of synchronised screw rotors,
combined main body/step up gearcase assembly and inlet bearing carrier.
The compact shape and size of the compressor make it ideal for mounting
inside the chassis on most vehicles to enable low cost prop. shaft driving.
A through shaft allows CW or ACW input drive rotation with mounting points
on either side of the machine to provide further exibility.
The standard compressor package consists of the following equipment:
• Basic XK12 machine and mounting kit.
• Inlet lter/kit
• Commissioning lter
• Relief valve
• Check valve and ange pack.
• Discharge (outlet) silencer - absorptive or reactive
• Torque limiting coupling
2.2
Drive options
The XK12 can be driven using the following drive systems.
Prop. shaft drive Direct from a vehicle PTO
Hydraulic drive Several drives can be o ered depending on the application
Electric motor
Packages on base frames
Engine drive
Packages on base frames
XK12 Installation, Operating & Maintenance Manual
XK12 Installation, Operating & Maintenance Manual
Page 4
Page 4
Advertisement
Table of Contents
