Table of Contents
Advertisement
Network Cards
The Network Cards setting displays the network cards installed in the terminal.
1. Tap Start > Settings > Connections > Network Cards.
2. Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.)
3. If you make a change on one of these tabs, tap OK to confirm the changes.
4. You must perform a soft reset to update the registry entries; see
15.
During the soft reset, the new registry entries are created and can be read by the applications
that need them.
Do NOT perform a
!
the terminal to factory defaults, which erases network adapter modifications made here.
Dolphin® 7600II Mobile Computer User's
Guide–Preliminary
Hard Reset (Cold Boot)
(see page 3-15) after modifying an adapter here. Hard resets return
Soft Reset (Warm Boot)
Rev (a) 01
5/29/08
on page
3-
7 - 11
Advertisement
Table of Contents
