Chapter 2 - Getting Started; Out Of The Box - Honeywell Dolphin 7600II User Manual

2
Getting Started

Out of the Box

Verify that your carton contains the following items:
• Dolphin 7600II mobile computer (the terminal)
• Main battery pack (3.7v, Li-ion)
• AC power supply
• Localized plug adapters
• User CD
Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see
Service and Repair
Step 1. Install the Main Battery
Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured
!
by Honeywell may result in damage not covered by the warranty.
Step 2. Charge the Batteries
Dolphin terminals ship with both the main battery
pack and internal backup battery significantly
discharged of power. Charge the main battery
pack with the charging cable for a minimum of
four hours before initial use.
1. Attach the appropriate plug adapter to the
plug of the power cable.
2. Plug the *power cable into the
(see page 3-12) on the left side.
3. Insert the plug into the appropriate power
source.
*This power cable can also be used to power the
Dolphin HomeBase Device
Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or
!
power adapters not sold/manufactured by Honeywell may cause damage not covered by the warranty.
Dolphin® 7600II Mobile Computer User's
Guide–Preliminary
on page 14-1.
DC Power Jack
(see page 10-1).
Rev (a) 01
Power Cable
2
5/29/08
Product
1
2 - 1