6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but
firmly.
7. Use the card as necessary to smooth out any air pockets or bumps after application. Press gently
but firmly.
8. Press the Backlight
9. Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector.
10. Press the Blue
3 - 8
key to wake the terminal and check the touch panel with the stylus.
+ Backlight
keys to put the terminal back in
Rev (a) 01
5/29/08
Touch Panel
Suspend Mode
(see page 3-26).
Dolphin® 7600II Mobile Computer User's
Guide–Preliminary