Table of Contents
Advertisement
About Network Communications
You can easily add the mobile computer to your wireless or wired network. Connect
the EDA56 to your computer using:
•
•
•
•
Connect to a Wi-Fi Network
The computer contains an 802.11 a/b/g/n/ac/ax radio to transfer data using
wireless communications. Before you connect to a Wi-Fi network, you need to know
about your network security protocol and its required credentials.
By default, the 802.11 radio is disabled.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. On the list, tap a network name to initiate a connection.
5. Enter any required information if the network is secured (e.g., password, key or
6. Tap Connect.
Once you connect to a saved Wi-Fi network:
•
•
•
•
EDA56 User Guide
802.11 a/b/g/n/ac/ax radio communication technology
Ethernet communication technology
Bluetooth communication technology
USB communication technology
> Network & internet > Wi-Fi.
the toggle button to turn the Wi-Fi radio On
networks appears.
To add a network if it does not appear on the list:
a. Navigate to the end of the discovered network list, and then tap
Add network.
b. Type the Wi-Fi network name (SSID).
c. Choose a security protocol and add any required information.
d. Tap Save.
certificate name).
Tap the network name on the list to view details (e.g., status, signal strength,
speed, frequency, security type). Select Cancel to close details screen.
The computer automatically connects to the same network when the network is
in range and the Wi-Fi radio is turned on.
To remove a network from your saved list, tap and hold the network name and
select Forget. You can do this for networks you no longer use.
To view a list of only your saved networks, tap Saved networks.
. A list of discovered
59
Advertisement
Table of Contents
