Table of Contents
Advertisement
Lubrication
General info
Always store lubricants clean, dry and cool - preferably at a constant
temperature - to avoid contamination from dirt and condensed water.
Keep oil filling jugs, hoppers and grease guns clean, and clean the
lubricating points thoroughly before lubricating. Avoid skin contact with
oil products for longer periods.
Always follow the shown direction concerning recommended quantity.
If no recommended quantity is given, feed lubricator until new grease
becomes visible.
Pictograms in lubrication & oiling plans tell the following:
1. Lubricant to be used (see "Recommended lubricants").
2. Operating hours before next lubrication.
ATTENTION! If the sprayer is cleaned with a high pressure cleaner, lubrication of the entire machine is recommended.
Recommended lubricants
BALL BEARINGS:
Universal Lithium grease, NLGI No. 2
SHELL RETINAX EP2
CASTROL LMX GREASE
Boom lubrication & oiling plan
SLIDE BEARINGS:
Lithium grease with
Molybdenumdisulphide or graphite
SHELL RETINAX HDM2
CASTROL MOLYMAX
6 - Maintenance
OIL LUB. POINTS:
TOTAL Transmission TM
SAE 80W/90
Castrol EPX 80W/90
SHELL Spirax 80W/90
Mobil Mobilube 80W/90
6.1
Advertisement
Table of Contents
