Application < Checkweighing; Application-Specific Settings - KERN 572 Operating Instructions Manual

12 Application < Checkweighing >
Shouldn't the application <Checkweighing> already be enabled, select the
menu setting < mode >  < check >, see chap. 9

12.1 Application-specific settings

Call up menu:
Press the TARE key and hold it until < apcmen > is displayed.

The display changes to < chkmod> followed by < target>.


Navigation in menu see chap. 13.1
Overview:
Level 1
target
Target weighing,
see chap. 12.2.1
limits
check weighing,
see chap. 12.2.2
Ptare
PRE-TARE
mode
Applications
T572-A-BA-e-2311
Level 2 Level 3
value
Target weight, numerical input, see chap. 3.2.2
errupp
Upper tolerance, numerical input see chap. 3.2.2
errlow
Lower tolerance, numerical input see chap. 3.2.2
clear
Delete settings
limupp
Upper limit value, numerical input see chap. 3.2.2
limloW
Lower limit value, numerical input see chap. 3.2.2
clear
Delete settings
Take over the placed weight as PRE-TARE value, see
actuAl
chap.10.2.1
manuAl
Numerical input of the tare weight, see chap. 10.2.2
CLEAR
Delete PRE-TARE value
weih
Weighing
count
Counting
check
Check weighing
Description / Chapter
see chap. 9
45