Application <Counting; Application-Specific Settings - KERN 572 Operating Instructions Manual

11 Application <Counting>
Shouldn't the application <Counting> already be enabled, select the menu
setting < mode >  < count >, see chap. 9

11.1 Application-specific settings

Call up menu:
Press the TARE key and hold it until < apcmen> is displayed.

The display changes to < coumod > followed by < ref >.


Navigation in menu see chap. 13.1
Overview:
Level 1
Ref
Reference quantity
Ptare
PRE-TARE
target
Target counting
mode
Applications
38
Level 2 Level 3
5
Reference quantity 5
10
Reference quantity 10
20
Reference quantity 20
50
Reference quantity 50
free
Optional, numerical input, see chap. 3.2.2
input
Input of piece weight, numerical input, see chap. 3.2.2
Take over the placed weight as PRE-TARE value, see chap.
actuAl
10.2.1
manuAl
Numerical input of the tare weight, see chap. 10.2.2
CLEAR
Delete PRE-TARE value
value
Counting mode
errupp
Upper tolerance
errlow
Lower tolerance
clear
Delete settings
count
Counting
check
Check weighing
wei h
Weighing
Description / Chapter
see chap. 11.2.2
see chap. 9
T572-A-BA-e-2311