Advertisement
support@nextlevelracing.com
7
Insert the Pedal Front Tube into the Pedal Frame. Press the spring-loaded pin and slide the tube onto the frame
until it clicks into place. Change the inclination of your pedals by installing the Pedal Front Tube upside down.
8
A
B
Repeat
on Other
Side
A) Detach the two sides of the Pedal Frame Bracket. B) Install the Pedals Frame Brackets to the Front Leg. Bolt
the two halves of the Pedal Frame Bracket together using the hardware uninstalled in Step 8A.
Inclined Pedals
15˚
Flat Pedals
0˚
Repeat
on Other
Side
10
9
NOTE: The tight fit between the
parts was designed to reduce flex
and enhance driving performance.
A
A) Remove the bolt and nut pre-installed in the Wheel Plate Socket. B) Insert the Wheel Plate Tube into the left
Wheel Plate Socket. C) Bolt and secure using the hardware previously uninstalled in Step 9A.
10
A
B
A) Open the Wheel Plate Latch. B) Swing the Wheel Plate tube. C) Secure it in place by closing the Latch.
Video Instruction: bit.ly/nlrbuild
B
C
C
11
Advertisement
