Table of Contents
Advertisement
Spin drying
The MotionSkin can be spun at 400 rpm after washing.
Drying
The MotionSkin should be air-dried hanging on a hanger, with the
electrodes turned inside out.
PLEASE NOTE
Damage caused by disinfectants
Disinfectants contain isopropyl alcohol (or
similar). These negatively affect the
conductivity of the MotionSkin by washing out
the silver nano-particles.
The manufacturer has produced the MotionSkin
using anti-bacterial fibres.
• Do not disinfect the MotionSkin.
INFORMATION
Residual dampness after spinning
The MotionSkin can be used immediately after
spin drying. It may still feel slightly damp, which
is not an issue when in use and actually
enhances the functionality of the electrodes.
PLEASE NOTE
Damage caused by drying
The MotionSkin should be air-dried. If dried in a
tumble dryer or in direct UV radiation. the
material can be damaged.
• Do not dry the MotionSkin in a tumble dryer.
• Do not put the MotionSkin in direct sunlight
(UV radiation).
19
Advertisement
Table of Contents
