Charging The Powerbox - EMS EasyMotionSkin Instruction Manual

The PowerBox features an internal chargeable battery.
This is how you charge the battery in the PowerBox:
1. Ensure that the PowerBox is not connected to a MotionSkin.
2. Connect the PowerBox to a socket using the power supply
unit supplied.
The following status is displayed when the PowerBox is turned on or during
charging.
• Red light flashes quickly Low battery
• Red light flashes: Battery charging
• Red light is on: Battery is charged
Rechargeable batteries have a limited number of charging cycles and must
be replaced over time. The charging cycle and battery charging time depend
on the use of the device and the application environment.
10
INFORMATION
Charge for 10 hours before using for the first
time
Please charge the PowerBox for at least 10 hours
before using it for the first time.
Only use the power supply unit supplied to
charge the PowerBox.
Charging the
PowerBox