Samson 3371 Mounting And Operating Instructions page 7

Referenced standards, directives and regulations
Furthermore, the actuators are partly completed machinery as defined in the Machinery Di-
rective 2006/42/EC. The declaration of incorporation is included in the 'Certificates' sec-
tion.
According to the ignition risk assessment performed in accordance with Clause 5.2 of
ISO 80079-36, the non-electrical actuators do not have their own potential ignition source
even in the rare incident of an operating fault. As a result, they do not fall within the scope of
Directive 2014/34/EU.
Î For connection to the equipotential bonding system, observe the requirements specified in
Clause 6.4 of EN 60079-14 (VDE 0165-1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions for the mounted valve e.g. u EB 8111 for
SAMSON Type 3321 Valve
− Mounting and operating instructions for mounted valve accessories (positioner, solenoid
valve etc.)
− u AB 0100 for tools, tightening torques and lubricant
− When a substance is used in the device, which is listed as being a substance of very high
concern on the candidate list of the REACH regulation:
Information on safe use of the part affected
u www.samsongroup.com > About SAMSON > Material Compliance > REACH
If a device contains a substance which is listed as being a substance of very high concern
on the candidate list of the REACH regulation, this circumstance is indicated on the
SAMSON delivery note.
EB 8317 EN
Safety instructions and measures
1-3