INSTALLING THE WATER BLOCK
Non-abrasive
Cloth
IHS
STEP 2
STEP 2
STEP 1
CLEANING THE CPU
Wipe the CPU's contact surface (by using non–abrasive cloth or
Q-tip).
STEP 2
THERMAL COMPOUND APLICATION
Applying thermal compound: on a clean IHS, apply a line of thermal
compound and spread it over the whole CPU heat spreader (IHS)
with a credit card or equivalent.
The layer of the thermal compound must be thin and even in thickness
through the whole surface of the IHS. A too-thick application could
lead to poor performance.
For this step, you will need:
Thermal Grease
- 6 -