EK Pro LGA 1700 User Manual page 2

This product is intended for installation only by expert users. Please
consult with a qualified technician for installation. Improper installation
may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these products
nor their installation. The following instructions are subject to change
without notice. Please visit our website www.ekwb.com for updates.
Before installing this product, please read the important notice,
disclosure, and warranty conditions printed on the back of the box.
Before you start using this product, please follow these basic guidelines:
Please read the manual carefully before starting the
installation process.
Please remove your graphics card from the computer
to ensure the safest mounting process and prevent any
possible damage to your GPU and/or graphics card circuit
board (PCB).
The EK-HFB and EK-ACF type fittings require only a small
amount of force to screw them firmly in place since the
rubber O-ring gaskets ensure the liquid seal.
The use of corrosion
recommended for any liquid cooling system.
Do not use pure distilled water. For best results, EK
recommends the use of EK-CryoFuel coolants.
Make sure to bleed the air from your water block thoroughly,
or you will not reach optimal performance.
inhibiting coolants is always