Troubleshooting; Transportation, Storage And Disposal - Husqvarna 535RJ Operator's Manual

Starting failure
Check Possible cause
Stop button Stop position
Starter pawls Binding pawls
Fuel tank Incorrect fuel
type.
Carburetor Adjustment of
the idle speed.
Spark (no Spark plug dirty
spark) or wet.
Spark plug
clearance in-
correct.
Spark plug Spark plug
loose.
Fuel filter Clogged fuel fil-
ter.
Engine starts but does not stay running
Check Possible cause
Fuel tank Incorrect fuel
type.
Carburetor Engine will not
idle correctly.
Air filter Clogged air fil-
ter.
Fuel filter Clogged fuel fil-
ter.
Transportation and storage
• Let the product cool before transportation or storage.
• Remove the spark plug cap before long-term
storage.
1999 - 001 - 14.06.2023

Troubleshooting

Solution
Set the stop switch to the start position.
Adjust or replace the pawls.
Clean around the pawls.
Speak to an approved servicing dealer.
Drain it and use correct fuel.
Adjust the idle speed with the T screw.
Make sure that the spark plug is dry and clean.
Clean the spark plug. Check that the electrode gap is correct. Make sure that the
spark plug is installed with a supressor.
Refer to technical data for correct electrode gap.
Tighten the spark plug.
Replace the fuel filter.
Solution
Drain it and use correct fuel.
Speak to your servicing dealer.
Clean the air filter.
Replace the fuel filter.

Transportation, storage and disposal

• Attach the product during transportation. Make sure
that it cannot move.
• Make sure that there is no risk of fuel leaks, fuel
fumes, sparks or flames during transportation and
storage.
21