Troubleshooting - Husqvarna Aspire T28-P4A Operator's Manual

Hide thumbs Also See for Aspire T28-P4A:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Maintenance
Make sure that the cutting attachment is not damaged. Replace the cutting
attachment if it is damaged.
Make sure that the cutting attachment guard is not damaged. Replace the cut-
ting attachment guard if it is damaged.
Make sure that the screws and nuts are tight.
Make sure that the battery release buttons on the battery works and locks the
battery in the product.
Examine that the battery charger is not damaged and function correctly.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
Make sure that the battery charger is not damaged.
Examine all cables, couplings and connections. Make sure they are not dam-
aged and free from dirt.
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
User interface
Problem
Possible faults
Green start LED
Low battery voltage.
flashes.
18
To examine and replace the trimmer
head
1. Do a check of the trimmer head for damages and
cracks.
2. Turn the output shaft until the hole in the drive disc
aligns with the hole in the gear housing.
3. Install the combination tool in the hole to lock the
shaft.
4. Turn the trimmer head counterclockwise.
 
(Fig. 50)
 
5. Replace the trimmer head.
6. Assemble the trimmer head. Refer to
the trimmer head on page 15 .

Troubleshooting

Possible solution
Charge the battery.
Daily
Weekly
Monthly
X
X
X
X
X
X
X
X
X
X
To assemble
1885 - 005 - 18.12.2023

Advertisement

Table of Contents
loading

Table of Contents