Samsung DW60M5044 Series User Manual page 45

PROBLEM
Steam
Black or gray marks on
dishes
Water standing in the
bottom of the tub
Dishwasher leaks
Buttons are not
working on power on
state
The result of washing performance may be caused by a power supply issue. Try another program
before contacting for service.
DW5500MM_DD81-02615C-10_EN.indd 45 DW5500MM_DD81-02615C-10_EN.indd 45
POSSIBLE CAUSE
• Normal phenomenon.
• Aluminum utensils have
rubbed against dishes.
• This is normal.
• Overfill dispenser or rinse
aid spills.
• Dishwasher isn't level.
• Door is open.
• Control lock function is
selected.
WHAT TO DO
• There is some steam coming through the
vent by the door latch during drying and
water draining.
• Use a mild abrasive cleaner to eliminate
those marks.
• A small amount of clean water around the
outlet on the tub bottom keeps the water
seal lubricated.
• Be careful not to overfill the rinse aid
dispenser.
Spilled rinse aid could cause overusing
and lead to overflowing.
Wipe away any spills with a damp cloth.
• Make sure the dishwasher is level.
• When door is opened, buttons are not
working except POWER button. Close
the door and press the button.
• When selected Control lock function,
buttons are not responded. To
unlock this function, hold down the
Control lock button for three (3)
seconds.
Also, Control lock function is released
when power cord is reconnected.
Troubleshooting _45
2022-12-19 오후 1:50:57 2022-12-19 오후 1:50:57