Advertisement
Quick Links
REPAIR
DISHWASHER
Basic Model
Model Name
Model Code
DISHWASHER
DW60M****F*
:
DW60H6050 Series
DW60H5050 Series
:
DW60M6072 Series
DW60M5062 Series
DW60M5052 Series
DW60M5050 Series
DW60M5042 Series
:
DW60M6072FS
DW60M5062FS
DW60M5052FS
DW60M5050BB
DW60M5042FW
Guide
* For End User.
DW60M5050BB
DW60M6072FW
DW60M5062FW
DW60M5052FW
DW60M5042FS
Advertisement
Related Manuals for Samsung DW60H6050 Series
Summary of Contents for Samsung DW60H6050 Series
- Page 1 DISHWASHER Basic Model DW60H6050 Series DW60H5050 Series Model Name DW60M6072 Series DW60M5062 Series DW60M5052 Series DW60M5050 Series DW60M5042 Series Model Code DW60M6072FS DW60M6072FW DW60M5062FS DW60M5062FW DW60M5052FS DW60M5052FW DW60M5050BB DW60M5042FS DW60M5042FW REPAIR Guide * For End User. DISHWASHER DW60M****F* DW60M5050BB...
-
Page 2: Important Safety Notice
4447711. 2. Visit the part purchase site and enter the model code of your product to check the parts available for purchase. -
Page 3: Tools For Removal And Reassembly
4. Pull out the unit from the sink and lay it on the floor. Be careful of the drain hose when pulling out the unit. 5. For materials and repair information related to self-repair, refer to the web site : www.samsung.com/support Tools for Removal and Reassembly _ 3... -
Page 4: Standard Disassembly Drawings
2. STANDARD DISASSEMBLY DRAWINGS 2-1. PRECAUTION Caution Before servicing, - Make sure to remove all items include baskets inside dishwasher. - Drain the water in the dishwasher and disconnect the power supply. - Lock the water faucet that connected with inlet hose. - Uninstall the dishwasher from the furniture cabinet except simple work. - Page 5 2-2. CAP CASE BRAKE / GASKET BRAKE - Cap Case Brake : DD81-01387A / SVC-AIR BREAKER NUT - Gasket Brake : DD81-01388A / SVC-SEAL RING Part Figure Description [DISASSEMBLY] 1. Remove 3 screws that connect left SIDE PANEL to front side of dishwasher. - Type A: DD81-02693A / 2 pcs - Type B: DD81-02694A / 1 pc Warning...
- Page 6 Part Figure Description 4. Take off the left SIDE PANEL. Warning Do not do this work without safety gloves. It may cause injury from sharp edges. 5. Take off the CAP CASE BRAKE by rotating to counter-clockwise direction with long-nose pliers. Caution It can be broken easily when you use iron part of the pliers.
- Page 7 2-3. DOOR HINGE - Door Hinge : DD82-01505A, DD82-01506A / SVC ASSY-DOOR LINK R, L Part Figure Description [DISASSEMBLY] * PREPARATION: Remove SIDE PANEL Left & Right refer to the section of ‘CAP CASE BRAKE / GASKET BRAKE’. 1. Remove 8 screws fixing the ASSY CONTROL PANEL with Torx®...
- Page 8 Part Figure Description Hook Hook 4. Remove 2 terminals that connected to DETERGENT DISPENSER, and 1 ground wire that connected to BRACKET DOOR FRAME. Warning Be sure to remove the power plug before servicing. Caution Pay attention to hook of terminals. DOOR HINGE 5.
- Page 9 Part Figure Description GUIDE HINGE 6. Push both ribs of GUIDE HINGE to pull out the DOOR. Warning Do not do this work without safety gloves. It may cause injury from sharp edges of broken parts. About 15˚ 7. Do same work at the opposite side, and pull out the DOOR INNER assembly to the direction of about 15˚.
- Page 10 Part Figure Description [ASSEMBLY] 1. Assemble the DOOR HINGE assembly and BRACKET DOOR FRAME with machine screws. - Screws for DOOR HINGE assembly: DD81-02764A / 4 pcs - Screws for BRACKET DOOR FRAME: DD81-02728A / 2 pcs Warning Do not do this work without safety gloves. It may cause injury from sharp edges.
- Page 11 Part Figure Description 5. Connect the wire harness to Sub PBA. Caution Make sure the Wire harness are not getting stuck in other parts. DW60M****F* NOTE : Incase of DW60M50**** models, place the DOOR SWITCH assembly on the CONTROL PANEL also. DW60M5050BB 6.
- Page 12 2-4. HOLDER HINGE - Holder Hinge : DD81-01367A / SVC-GUIDE DOOR LINK Part Figure Description [DISASSEMBLY] * PREPARATION: Disassemble SIDE PANEL left & right. 1. Remove HOLDER ROPE DOOR from the DOOR HINGE left & right with the DOOR closed. Warning Be sure to remove the power plug before servicing.
- Page 13 2-5. SEAL TUB PACKING - Seal Tub Packing : DD81-01381A / SVC-GASKET TUB Part Figure Description [DISASSEMBLY] 1. Pull out the old seal from the BRACKET SEAL TUB. Warning Seal tub packing Be sure to remove the power plug before servicing. Warning Be careful to touch the BRACKET SEAL TUB after removed the seal.
- Page 14 Part Figure Description 3. Put Seal in the left & right side of the bottom. NOTE : The folded seal is about 3~4 cm long. About 3~4 cm SEAL TUB PACKING 4. Press the seal from the top corner toward remaining side.
- Page 15 2-6. ROTOR LOWER / ASSY DUCT NOZZLE - Rotor Lower : DD81-01847A / SVC-NOZZLE LOWER - Assy Duct Nozzle : DD82-01501A / SVC ASSY-DUCT NOZZLE (DW60M6072F*/DW60M5062F*) DD82-01646A / SVC ASSY-DUCT NOZZLE (DW60M5052F*/DW60M5050BB/DW60M5042F*) Part Figure Description [DISASSEMBLY] 1. Open the dishwasher's door, and remove the ROTOR LOWER.
- Page 16 Part Figure Description Sump [ASSEMBLY] 1. Put the HOLDER ROTOR LOWER on the SUMP. Caution Pay attention to assemble the HOLDER ROTOR LOWER correctly. There’re risks of leakage or poor performance when it’s misassembled. Guide of Holder Bottom of Holder ROTOR LOWER / ASSY DUCT NOZZLE...
- Page 17 Part Figure Description 3. Fasten 2 screws to fit the ASSY DUCT NOZZLE. - Screws: DD81-02718A / 2 pcs ROTOR LOWER / ASSY DUCT NOZZLE 4. Put the ROTOR LOWER onto the HOLDER ROTOR LOWER. Standard Disassembly Drawings _ 17...
- Page 18 2-7. ASSY ROTOR MIDDLE - Assy Rotor Middle : DD82-01500A / SVC ASSY-MIDDLE NOZZLE Part Figure Description [DISASSEMBLY] 1. Open the dishwasher’s DOOR, and take off the BASKET MIDDLE. 2. Release 2 hooks to take off ASSY ROTOR MIDDLE from the BASKET MIDDLE. Caution Be careful not to break the hooks.
- Page 19 2-8. COARSE FILTER / FINE FILTER / MICRO FILTER - Coarse Filter : DD81-02452A / SVC-FILTER COARSE - Fine Filter : DD81-02454A / SVC-FILTER FINE - Micro Filter : DD81-02453A / SVC-FILTER MICRO Part Figure Description [DISASSEMBLY] 1. Turn the COARSE FILTER counter-clockwise to unlock the filter assembly.
- Page 20 2-9. BASKET MIDDLE - Basket Middle : DD82-01496A / SVC ASSY-BASKET UPPER (DW60M6072F*/DW60M5062F*) DD82-01496C / SVC ASSY-BASKET UPPER (DW60M5052F*/DW60M5050BB) DD82-01496J / SVC ASSY-BASKET UPPER (DW60M5042F*) Part Figure Description [DISASSEMBLY] 1. Open the dishwasher’s DOOR, and take off the BASKET MIDDLE. NOTE : Please refer to the section of ‘ASSY ROTOR MIDDLE’...
- Page 21 2-10. BASKET LOWER - Basket Lower : DD82-01498A / SVC ASSY-BASKET LOWER (DW60M6072F*/DW60M5062F*) DD82-01645A / SVC ASSY-BASKET LOWER (DW60M5062F*/DW60M5050BB) DD82-01645C / SVC ASSY-BASKET LOWER (DW60M5042F*) Part Figure Description [DISASSEMBLY] 1. Open the dishwasher’s DOOR, and take off the BASKET LOWER. 2.
- Page 22 2-11. BASKET 3 - Basket 3 : DD82-01499A / SVC ASSY-BASKET 3rd (DW60M6072F*/DW60M5062F*) Part Figure Description [DISASSEMBLY] 1. Open the dishwasher’s door, and take off the BASKET 3 from the RAIL BASKET. 2. When you take off the BASKET 3 pull it towards the front and then remove it by lifting it up slightly.
- Page 23 2-12. RAIL BASKET / HOLDER RAIL REAR - Rail Basket : DD81-01379A, DD81-01413A / SVC-RAIL BASKET L, R (All models) DD82-01170A, DD82-01169A / SVC ASSY-RAIL BASKET 3RD L, R (DW60M6072F*/DW60M5062F*) - Holder Rail Rear : DD81-01378A / SVC-STOPPER RAIL REAR (All models) DD81-01674A / SVC-STOPPER RAIL REAR 3RD (DW60M6072F*/DW60M5062F*) Part Figure...
- Page 24 2-13. BASKET CUTLERY - Basket Cutlery : DD82-01147A / SVC ASSY-CASE SPOON (DW60M5052F*/DW60M5050BB/DW60M5042F*) Part Figure Description [DISASSEMBLY / ASSEMBLY] BASKET CUTLERY 1. This part will be serviced by assembly part only. 24 _ Standard Disassembly Drawings...
- Page 25 2-14. CAP SOFTENER - Cap Softener: DD81-01678A / SVC-CASE SOFTENER Part Figure Description [DISASSEMBLY] 1. Release the cap of softener by rotating to counter- clockwise. CAP SOFTENER [REASSEMBLY] 1. Reassembly is the reverse order of disassembly. Cap Softener Standard Disassembly Drawings _ 25...
-
Page 26: Checkpoints After Finishing A Service
3. CHECKPOINTS AFTER FINISHING A SERVICE 1. Check the safety device Check the operation of the door lock switch. Make sure that it is locked while the dishwasher is running and that it is unlocked when the dishwasher stops. 2. Use authenticated parts only If any part is not authenticated, replace it with an authenticated part. - Page 27 North & Latin America gspn3.samsungcsportal.com China china.samsungportal.com This Service Manual is a property of Samsung Electronics Co.,Ltd. © 2021 Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable All rights reserved. International and/or domestic law.