Advertisement
Quick Links
Advertisement
Related Manuals for Aerpro APMSMG1
Summary of Contents for Aerpro APMSMG1
- Page 1 APMSMG1 DASH & VENT MOUNT MAGNETIC HOLDER manual aerpro.com...
-
Page 2: Device Compatibility
Device Compatibility This product is designed for use with MagSafe Compatible iPhones and cases. On supported models, MagSafe charging magnetic holders snap to the back of an iPhone or its MagSafe case or sleeve. The magnets ensure proper alignment for fast wireless charging. -
Page 3: Product Information
Product Information Charging Contact Magnetic Adhesive Head Mount Alignment Magnet Hook Clip Fixing Plate Adjustable Collar... - Page 4 Attaching the mount to the holder 1. Place the adjustable collar over the ball of the mount 2. Press the ball of the mount into the back of the magnetic head 3. Move the magnetic head to the desired position and tighten the adjustable collar. Attaching the adhesive mount to a flat surface 1.
- Page 5 Attaching the hook mount to a vent 1. Unfasten the hook clip sufficiently by rotating the fixing plate. 2. Insert the hook clip to the center of the vents 3. Rotate the adjustable collar so that the fixing plate tightens against the hook to avoid the presence of any gap between fixing plate and vent.
- Page 6 Attaching the hook mount to a vent...
- Page 7 CAUTION 1. The magnet used in this product will have no negative impact on the phone. In case of any applications not working correctly, please restart application and slightly adjust the position of where smartphone is mounted. 2. Never mount a smartphone onto holder with a magnetic credit card in the smartphone case.
-
Page 8: Technical Assistance
Magnetic head Vent mount Adhesive mount Technical assistance If you need assistance with your Aerpro product call Aerpro Support Australia. TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST This manual is considered correct at time of writing but is subject to change.