EIM Lab-OnThe-Go Manual page 55

Integrated Signal Generator and Oscilloscope
5. Once connection has established, the software will display Zoolark's
waveform. You can open the cursor function for more detailed
measurement. The Export icon allows data to be exported in .csv
format.
Instructions for Firmware Updates
Firmware is a piece of machine code to be flashed into the hardware
and enables certain functionalities of the device. The initial firmware was
released on July 2021 during the Kickstarter product launch. This firmware
did not support computer communication. All firmware version released
after Oct 31, 2022 improved screen refresh rate and have supported
computer communication. We encourage you update to the latest
firmware.
To upgrade the firmware, please follow the steps below:
1. Download the firmware from Zoolark's product website. The file
extension is .AXF.
2. Install the driver with the "run.bat" file in the unzipped folder of
Zookee. Right click this file and choose Run as administrator. This bat
file takes less than 1s of run time.
Apx C
53