EIM Lab-OnThe-Go Manual page 49

User Guidance of the Multimeter Apx B
Measurement Modes
NCV (Non-contact Voltage)
VEGO has an internal sensor to detect the electromagnetic field of an AC
voltage. In position f or NCV mode, the built-in buzzer will periodically
sound while VEGO is in proximity of a AC voltage source (e.g. Line power).
The buzzing frequency increases for higher AC voltage.
Current Measurement
In position g or [A] mode, the internal fuse can sustain 10A current for
10 seconds. To prevent blowing the fuse, DO NOT exceed 10A while
measuring the current.
47