3.
Place the back plate on the mounting surface and mark the location of the four screw holes.
Callouts
Description
A
Press here
B
Back plate
C
Screw locations
4.
Using the four provided screws, mount the annunciator back plate on the wall or mounting surface.
5.
To attach the back plate to the housing, follow step 2 in reverse, see Figure 7.
page 9
Foundation Series 2606-9111 LED Annunciator Installation Guide
Figure 6: Marking the location of the screw holes
Figure 7: Mounting the annunciator back plate
579-1435 Rev B