Page 1
Rack Adapter Panel GRA-408 Assembly Guide GW INSTEK PART NO. 82RA-40800M01 This assembly manual contains proprietary information, which is protected by copyrights. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will company.
Page 3
GRA-408 Assembly Manual GRA-408 The GRA‐408 4U 19” rack mount is suited for the PSS series D.C. (PSS‐2005, PSS‐3203) power supplies. Incorporating a strong frame and robust design, the GRA‐408 can fit up to three PSS series power supplies. Component List..........2 Assembly ............3...
Component List Component List Description Please check to make sure all the components of the GRA-408 rack mount kit are provided. Item No. Item Quantity Components Main Bracket Front Panel Large Face Plate Medium Face Plate Small Face Plate Binding Plate...
Page 5
GRA-408 Assembly Manual Assembly Assembly of the GRA-408 rack mount depends on the Description number of PSS series power supplies that are to be mounted. Steps 1. Select the type and amount of face plates required. See the diagrams below to determine the correct configuration. 1 power supply unit: Large Face Plate •...
Page 6
Assembly 2. Screw the selected face plates into the inside of the Front Panel (2) using the BMS‐M4*10 (11) screws. 3. Remove the M3 screws from the bottom sides of the PSS power supply unit(s). ...
Page 7
GRA-408 Assembly Manual 4. Using the screws from step 3, attach the Binding Plate to the power supply unit(s). 5. Screw the Instrument Hold Plate (9) onto the inside of the Main Bracket using FMS‐M3*8 (12) screws 6. Screw the 4U Brackets (8) into place using the BMS‐M4*10 (10) screws. ...
Page 8
Assembly 7. Mount the power supply unit(s) into the Main Bracket (1) using the BMS‐W‐M3*8 screws (11). NOTE Ensure unit placement is correct before fastening the screws. 8. Screw the handles (7) through the Front Panel (2) into the Main Bracket (1) using the PMS‐M4*10 (13) screws. ...
Page 9
GRA-408 Assembly Manual Depending upon the configuration, the GRA‐408 Rack Adapter Panels should resemble those shown below. 9. Mount the panels into an appropriate rack. Complete Assembly is complete. ...