Page 1
Rack Adapter Panel GRA-426 Assembly Manual GW INSTEK PART NO. 82RA-42600M01 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com This assembly manual contains proprietary information, which is protected by copyrights. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will company.
Page 2
Overview GRA-426 Overview The GRA-426 rack mount is suited for the GDS-2000E and GDS-1000B. The GRA-426 is designed for use with standard sized rack units. Rack Mount Adapter Component List and Assembly Description Please check to make sure all the components of the GRA-426 rack mount kit are provided.
GRA-426 Assembly Manual Assembly Initial setup 1. Connect the handle (62RA-411HD101) to the front plate (62RA-426FP101) and the bottom cover(62RA-426LO101) with “594B-06012ZS1” screws. 2. Connect the top (57RG-20B03701) and bottom(57RG-20B03801) foam squares to the left(62RA-426HP101) and right(62RA-426HP201) fasteners.
Page 4
Assembly Instrument 1. Place the scope onto the floor of the rack, against the insertion window. 2. Insert the left and right fasteners into the two holes in the bottom cover. Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com...
Page 5
GRA-426 Assembly Manual 3. Screw the left and right fasteners to the rack with the embossed nuts(6010-L00040S1). Appearance GRA-426...