Advertisement
Quick Links
Rack Adapter Panel
GRA-432
Assembly Manual
GW INSTEK PART NO. 82RA-43200M01
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language without
prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance procedures
at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER
Advertisement
Related Manuals for GW Instek GRA-432
Summary of Contents for GW Instek GRA-432
- Page 1 Rack Adapter Panel GRA-432 Assembly Manual GW INSTEK PART NO. 82RA-43200M01 This assembly manual contains proprietary information, which is protected by copyrights. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will company.
- Page 2 GRA-432 Overview The GRA‐432 2U 19”rack mount is suited for the AFG‐30xx Series Arbitrary Function Generator. The GRA‐432 is designed for use with standard sized rack units. Rack Mount Adapter Component List Description Please check to make sure all the components of the GRA‐432 rack mount kit are provided. Item Part NO. Description QTY GRA-432 62RA-432HP101 2U BRACKET Assembly 594B-04010NS1 BMS, 4*10...
- Page 3 GRA-432 Assembly Manual Rack Mount Adapter Assembly Description Assembly of the GRA‐432 involves first removing the handle and the protection feet. The rack mount is then securely attached to both sides of the AFG‐30xx chassis with screws. Steps 1. Position the handles as shown in the diagram below and gently move apart both sides. 2. Remove completely the handle. ...
- Page 4 GRA-432 3. Remove the 8 protection feet as shown in the below diagrams and detailed in step 1 and 2. ...
- Page 5 GRA-432 Assembly Manual 4. Attach the two brackets (62RA‐432HP101) securely to both sides of the AFG‐30xx using the BMS 4*10 screws (594B‐04010NS1). In order to make sure your equipment will be securely installed in a rack, only BMS 4*10 screws should be used in that rack mount installation. ...
- Page 6 GRA-432 Appearance GRA-432 ...