Page 1
Rack Adapter Panel GRA-436 Assembly Manual GW INSTEK PART NO. 82RA-43600M01 This assembly manual contains proprietary information, which is protected by copyrights. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will company.
Page 2
GRA-436 Assembly Manual GRA-436 Overview The GRA-436 rack mount is suited for several models including A-type of GDM-82XX/GDM-906X, GPM8213, LCR6000 and GBM3000, and B-type of PSR60-6/PSR36-7. The GRA-436 is specifically designed to hold one or two units and fits in a standard 19” 2U rack.
Page 3
GRA-436 Assembly Manual Rack Adaptor Assembly Step 1 - For A-type models preparation 1. Rotate the handler upward followed by pulling out the bases of handler from both left and right sides to remove the handler away from unit. See the figure below of the model GDM-906X for example.
Page 4
GRA-436 Assembly Manual For B-type models Loosen the screws followed by removing the protection feet. See the figure below of the model PSR36-7 for example. Step 2 – for Connect the front plate with unit in parallel with fastening the single unit plastic rivets firmly.
Page 5
GRA-436 Assembly Manual Step 3 – for Place the unit along with front plate combined into the single unit bottom cover of rack mount followed by tightening the M4*12 screws in the front end as the following figure shown. M4*12 Screws * 2...
GRA-436 Assembly Manual Multiple Applications The GRA-436 rack mount provides, in addition to the single unit assembly, up to 2 types of assembly for both dual units (A-type) and hybrid units (B-type) applications. See the following figures respectively for reference.
Page 7
GRA-436 Assembly Manual Rack Adaptor Dimension All dimensions are shown in millimeters.