Page 1
Rack Adapter Panel GRA-410 Assembly Manual GW INSTEK PART NO. 82RA-41000MC1 This assembly manual contains proprietary information, which is protected by copyrights. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will company.
The GRA-410 supports both the EIA (GRA-410-E) and JIS (GRA-410-J) standards for use with standard sized rack units. Incorporating a strong frame and robust design, the GRA-410 can fit up to 6 Type I, 3 Type II or 2 Type III PSW power supplies.
Assembly 62RA-410HP3A1 Rear Bracket 599B-03006NS1 IMS 3*6 62RA-410HP9A1 Rack HP 62RA-410HPD01 Rack HP 594B-W3008NS1 BMS-W-3*8 62RA-410HPC01 TOP Bracket Assembly Initial setup 1. Remove the handle (from) the power supply units. Remove the handle cover. Remove the screws securing the handle to the case.
Page 5
GRA-410 Assembly Manual 2. Attach the Front Bracket to the Middle Bracket with the rack screws. Front Bracket rack screw 3. Secure the Rack Holding Plates (Rack HP) to the groove on the Rear Bracket and to the instrument(s). Rack HP...
Use the SR-3S pins to hold two adjacent brackets together. Blank panel screws Specification Load Capacity Max 20kg Rack Weight GRA-410-E:1.0kg GRA-410-E: 1.2kg Rack installation Diagram Please note the minimum width that is needed to be supported on the L-brackets.