Page 1
Rack Adapter Panel GRA-437 Assembly Manual GW INSTEK PART NO. 82RA-43700M01 This assembly manual contains proprietary information, which is protected by copyrights. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will company.
Page 2
GRA-437 Assembly Manual GRA-437 The GRA-437 rack mount is suited for the GPP Programmable DC Power Supplies. The GRA-437 supports both the EIA (GRA-437-E) and JIS (GRA-437-J) standards for use with standard sized rack units. Rack Mount Adapter Component List and Assembly...
GRA-437 Assembly Manual 599B-03006NS1 IMS 3*6 62RA-437HP301 RACK HP 594B-W3008NS1 BMS-W3*8 5320-00403011 SR-3S 62RA-414HP301 Top Bracket Assembly Initial setup 1. Remove the handle from the GPP power supply. Remove the handle cover. Remove the screws securing the handle to the case.
Page 5
GRA-437 Assembly Manual Instrument 1. Ensure the Middle Bracket is latched onto the catch on insertion the underside of the GPP. catch Middle Bracket 2. Attach the Front Bracket to the Middle Bracket with the rack screws. Front Bracket rack screw 3.
Page 6
GRA-437 Assembly Manual Blank panel 1. Insert the required number of blank insertion panels into the groove of the Front and Middle Brackets. 2. Secure the panels with the PMS-W-3*8 screws. Use the SR-3S pins to hold two adjacent brackets together.
GRA-437 Assembly Manual Specification Load Capacity Max 20kg Rack installation Diagram The minimum width that is needed to be supported on Note the L-brackets.