Hover-1 ALL-STAR 2.0 Operation Manual page 15

RIDING YOUR ALL-STAR 2.0
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN AND MAY LEAD TO DAMAGE TO YOUR ALL-STAR 2.0, VOID
YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE,
CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
Before using your ALL-STAR 2.0, be sure to familiarize yourself with the
operating procedures.
OPERATING YOUR ALL-STAR 2.0
Make sure the ALL-STAR 2.0 is fully charged before initial use. For
charging instructions, please follow details under CHARGING YOUR
ALL-STAR 2.0.
Stand directly behind your ALL-STAR 2.0 and place one foot on the
corresponding foot mat (as described in the diagram below). Keep
your weight on the foot which is still on the ground, otherwise the
ALL-STAR 2.0 may begin to move or vibrate, making it difficult to step
on evenly with your other foot. When you are ready, shift your weight
to the foot already placed on the ALL-STAR 2.0 and step on with your
second foot quickly and evenly (as described in the diagram
below).
Stay relaxed and step on quickly, confidently
and evenly. Imagine climbing stairs, one
foot, then the other. Look up once your feet
are even. The ALL-STAR 2.0 may vibrate or
spin in one direction, if weight and pressure
are applied to only one foot mat. THIS IS
NORMAL.
NOTES:
13