Table of Contents
Advertisement
5. Group/Door Mode
Group/Door mode is used for adjusting the group control panel or the door. When the power is ON with the
functional selector switch set to the group/door mode according to How to Turn the Power On in Section 3,
the display changes to the address entry indication. The Group/Door mode cannot be used for other types
than EC4-605.
5. 1
Screen Indication
● (1st to 8th digits): Address/Data indication
Indicates the access address and the data. Data will be indicated right-justified. Nothing will be
indicated to a digit not in use.
(9th digit): Section
of indication
(Dot 9):
Low-battery
detection
(Read Section 2.1)
Section of indication
Indication of address
Indication of data (in byte)
Indication of data (in word)
Indication of data (in long word)
(1st to 8th digits): Address/Data
indication
(Dot 1 – Dot 8): Position
lamp not used
Number of digit for
indication
6 digits
2 digit
4 digits
8 digits
22
Advertisement
Table of Contents
