Important Hints On The Special Features Of Oled Technology; Notes On Kinematics - Loewe bild 9 Operating Manual

Loewe bild 9
Operating manual
Miscellaneous
Important hints on the special features of
OLED technology
To maintain the high quality of picture display permanently, your Loewe
TV set calibrates itself automatically at regular intervals. In this way,
excess TFT capacitors are discharged and so-called image sticking
effects / „ghost images" are eliminated.
This calibration cycle will take a maximum of thirty minutes and starts
when your TV set is in standby mode. When switching the TV set off,
a screen text indicates that a pending refresh is due. In this case, do
not switch off the TV with its power switch and do not interrupt the
power supply.
Should such a calibration process be interrupted, it will be continued
when switching off the TV set next time. You still have the possibility
to start a refresh procedure manually by means of the user menu of
your Loewe TV set.
Call OLED calibration
HOME: Call Home view.
Select System settings,
OK call System settings.
Select Picture,
go to next column.
Select more ...,
call other settings.
Select OLED calibration,
OK Call.
Every 1500 hours, a calibration of OLEDs is necessary. This is done
automatically as soon as the switched off TV set is cooled down. The
procedure takes about two hours. Again, you will be previously infor-
med by an on-screen display.
To avoid temporary impairments of the picture display by long-lasting
still pictures, your Loewe TV set protects itself automatically. When still
images are displayed too long (for example, forgotten videotext pages),
the TV set automatically switches to a screen-friendly contrast mode.
After a new user operation, the device immediately returns to its nor-
mal state. In addition, each menu display is terminated automatically
when the TV set detects no operation for more than three minutes.
OLED technology allows for a design with an extremely thin display.
When you have mounted your Loewe TV set on a non-motorized in-
stallation option, avoid a too excessive force when rotating the TV set.

Notes on Kinematics

The Loewe TV set is equipped with a kinematics that moves the TV
set upwards or downwards when switching it on and off, whereby the
speaker cover is visible or is hidden.
Please make sure that there is no externally applied force opposing the
movement. You have the option to fix the position of the kinematics
from the menu, or disable the function.
Call Display kinematics settings
HOME: Call Home view.
Select System settings,
OK call System settings.
Select Control,
go to next column.
Select more ...,
call other settings.
Select Display kinematics,
OK Call.
Select the desired setting,
OK confirm selection.
on Determine here whether the screen should move
after each switching on and off or remain in a fixed
off, speaker
position.
visible
off, speaker
hidden
Transporting
For transport, push the screen gently upwards without pressure to
the screen surface and fix it in place with the shipping screw.
47