Additional Functions For Dr+ Archive Playback - Loewe bild 9 Operating Manual

Hide thumbs Also See for bild 9:
Table of Contents

Advertisement

Loewe bild 9
Operating manual
Video
Pause playback (freeze picture)
PAUSE key: Switch to freeze picture.
PLAY key: Continue playback.
Jump
By briefly pressing the
or
backwards in the movie.
Skip forwards.
Skip backwards.
Skipping with Smart Jump
The Smart Jump function ensures that the jump width is halved each
time the jump direction is changed or doubled after three jumps in
the same direction (max. 8 minutes). This way you can quickly find a
certain spot of the recording.
You are looking for a particular scene in a running programme:
Depending on your needs, press the key
or
(forwards) briefly several times, to roughly jump
to the area of the programme you are looking for.
If you skipped the desired scene of the programme,
jump in the opposite direction. This jump is executed
in halfs of the jump distance.
If you skipped the desired scene of the programme
again, jump again in the opposite direction. In the
process, the jump distance is cut in half again.
By halving the jump distance again when changing
direction you can gradually approach the desired
location.
Winding
To search for desired scenes in movies you can fast forward and rewind
at three different speeds. Sound is not audible during winding.
In case of time-shift viewing, playback is automatically activated
when the end of the recording is reached.
In case of Fast forward of archive entries, playback will finish at the
end of the recording. The DR+ archive is displayed again.
Press
or
a little bit longer.
With each brief pressing of
increase until you switch back to the first speed.
The different winding speeds are represented by the
symbols shown below.
PLAY key:
Continue playback.
In the case of Internet videos, please wait until these
are buffered in the memory. This can take a few
seconds, depending on the bit rate of the film and
Internet speed.
32
keys you can skip forwards and
(backwards)
or
the speed will

Additional functions for DR+ archive playback

There are additional editing and playback functions for playback of
recorded programmes from the DR+ archive.
Setting bookmarks
To retrieve interesting scenes in a movie later, you can manually set the
bookmarks. In addition, there are also automatically set bookmarks
for the start/end of a programme.
In programmes sent in Dolby Digital 5.1 format, the commercials are
detected and automatically bookmarked at the beginning and end of
the advertising block.
In case of a running time-shift recording (time-shift television), this
will be converted into an archive recording when a bookmark is set.
PLAY key (press longer): Set bookmark.
You will see a message on the screen. The status bar is
then faded in and you will see the set bookmark above
the bar for the playback.
Automatically set bookmarks are grey. Manually set
bookmarks are blue.
Jumping to Bookmarks
INFO: Show status display.
Select next
OK Skip to next or previous bookmark.
Or:
Blue key: Skip to next bookmark.
Yellow key: Skip to previous bookmark.
Delete manually set bookmark
Jump to the manually set bookmark to be deleted.
Select Delete bookmark
OK Delete bookmark.
Or:
Play key (press longer): Delete bookmark.
Interval functions
The intervals between manually or automatically set bookmarks
(intervals) can be faded out for future playbacks. In addition to that,
unwanted intervals at the beginning or end of your recorded broadcast
can be deleted.
An archive entry is replayed.
INFO: Show status bar.
Move to the desired interval in the recorded broadcast
by skipping or winding.
PAUSE: Stop play.
Select Interval functions
OK Call interval functions.
Select function.
or previous
bookmark,
,
,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bild 9.65Bild 9.55

Table of Contents