Demontage / Montage
Aus- und Einpackhinweise
Auspacken und Aufbau
Schneiden Sie mit einem Messer vorsichtig die unteren
Klebestreifen auf beiden Seiten des Kartons durch. Kip-
pen Sie dazu den Karton leicht an.
Entfernen Sie nun die Spannbänder. Nutzen Sie dafür
eine Schere.
Öffnen Sie den Karton von oben vorsichtig mit einem Mes-
ser. Achtung! Schneiden Sie nicht zu tief in den Karton,
um darunterliegende Teile nicht zu beschädigen.
Entnehmen Sie das Welcome-Box und die beiden Styro-
porschalen.
Disassembly / Assembly
Hints for unboxing and boxing
Unboxing and mounting
Cut the lower tapes on both sides of the box carefully by a
knife. Lift the box a bit for that.
Remove the tension bands. Use a pair of scissors for that.
Open the upper side of the box carefully by a knife. Mind
the depth of cut 5mm max to avoid a damage of lying un-
derneath parts.
Remove the Welcome-Box and both styrofoam protection
forms.
5