Advertisement
C
Y
ONFIGURE
OUR
The applications you will need to configure vary by product and by network. Review the list of
defaults for your unit before deciding what applications to configure. The following are some
common applications that should be configured on startup. These are all available online at
http://kb.adtran.com.
Configuring T1 Access to a Remote Site
Using PPP in AOS (video article 2003)
Configuring Port Forwarding in AOS
(video article 2291)
Configuring PPP in AOS (article 2523)
Configuring Frame Relay in AOS
(article 2350)
Configuring DHCP Server in AOS
(article 2149)
Configuring a VPN Using Aggressive Mode in
AOS (article 1926)
Important: For additional details on product features, specifications,
installation, and safety, refer to the appropriate hardware installation guide on
the AOS Documentation CD shipped with the base unit and available online at
http://kb.adtran.com.
N
V
5305 D
ET
ANTA
Feature
IP Address
User Name
Password
HTTP Server
Event History
IP Routing
R
F
ESTORING
ACTORY
On units that have a console port, you cannot restore the factory defaults, but must rather erase
the device's configuration and then reconfigure the unit to operate correctly for your network. To
erase the unit's current configuration, follow these steps:
1.
Access the unit's CLI and enter enable at the > prompt.
2.
Enter erase startup-config at the # prompt. The device will have a blank configuration upon
reboot.
3.
Enter reload at the # prompt to begin restarting the device. When prompted to save
configuration, enter no. When prompted to reboot, enter yes.
4.
Upon reboot, you will have to reconfigure the unit using the CONSOLE port. Follow the
steps outlined here or in the technical note, Accessing the Web Interface in AOS, available
online at
http://kb.adtran.com
4
A
PPLICATION
Configuring Internet Access (Many to One NAT) with
EFAULTS
D
EFAULTS
(article number 1788).
Copyright © 2010 ADTRAN, Inc. All Rights Reserved.
the Firewall Wizard in AOS (video article 2185)
Configuring QoS for VoIP in AOS
(video article 3091)
Configuring HDLC in AOS (article 2152)
Configuring QoS in AOS
(article 1617)
Configuring a VPN Using Main Mode in AOS
(article 1925)
Default Value
10.10.10.1
admin
password
Enabled
On
Enabled
Advertisement
