SATO MB410i Operator's Manual page 7

PRINT
Type
Speed
Resolution
Print Module (Dot Size)
Maximum Print Width
Maximum Print Length
MEDIA
Type
Wind Direction
Roll Diameter
Core Diameter
Size
Thickness
PROCESSING
CPU
Flash ROM
RAM
MB400i/MB410i Operator Manual
4 Inches Per Second (103mm/s) in normal mode
3 Inches Per Second (75 mm/s) in dispenser mode
Dual color printing or high resolution modes reduce
[Brackets indicate with liner sheet]
Width
Standard
Length
Width
Dispenser
Length
Width
Linerless
Length
PN 9001190C
Direct Thermal Only
speed
MB400i: 203 Dots Per Inch (8 d/mm)
MB410i: 305 Dots Per Inch (12 d/ mm)
0.0049 Inches (0.125 mm)
4.09 Inches (104 mm)
11.69 Inches (297 mm)
Direct Thermal Roll media
Face out
Maximum outer diameter:
2.63 inches (67 mm ±0.5 mm)
Inner Core diameter:
0.75 inch (19 mm), 1 inch (25 mm)
2 to 4.3 Inches (50 to 111 mm)
[2.1 to 4.4 Inches (53 to 114 mm)]
1 to 11.6 Inches (25 to 297 mm)
[1.1 to 11.8 Inches (28 to 300 mm)]
2 to 4.3 Inches (50-111 mm)
[2 to 4.4 Inches (53 to 114 mm)]
1 to 7.1 Inches (25 to 182 mm)
[1.1 to 7.2 Inches (28 to 185 mm)]
2 to 4.2 Inches (53 to 107 mm)
1 to 7.1 Inches (28 to 182 mm)
Label: 2.5 Mil to 7.5 Mil (0.064 ~ 0.190 mm)
Non-adhesive paper: 2.5 Mil (0.064 mm)
32 Bit RISC
4 Megabyte
2 Megabyte
Unit 1: Technical Data
Page 1-3