Error messages of the ERPC application
Error messages of the ERPC application
The table describes error messages that you will find in NCM S7 Diagnostics in the
"Application" diagnostic object. The errors coded in hexadecimal have the following
meaning:
Table D- 1
Code
0080
0081
0082
0083
0084
0085
CP 343-1 ERPC
Manual, 03/2010, C79000-G8976-C239-02
Meaning of the error coding
Meaning
deviceWISE was started.
h
Missing time synchronization in the CP
h
configuration
Free memory capacity of the internal file
h
system of the CP is below <
Free memory capacity of the flash system of
h
value
the CP is below <
The "Attention bit" was set in deviceWISE.
h
value
Error no. <
> occurred in deviceWISE.
h
value
> %
> %
Meaning / notes
Since time synchronization was not set in
the parameters, the time information of
the CP is wrong.
If this message is displayed, reduce the
amount of data for current transactions by
reducing the number of variables or the
length of arrays.
If this message is displayed, reduce the
number of triggers or the data in the CP-
internal database.
Group error that can be configured in
deviceWISE (see deviceWISE
documentation)
(see deviceWISE documentation)
D
81