Safety Symbol Meaning - Dexter Laundry T-350 Operators Manual Installation & Operation Instructions

2 Safety Symbol Meaning

Meaning: Do Not Play In Or Around This
Equipment
Meaning: Do Not Operate with Guards or
Covers Removed.
Meaning: Do Not Operate with Guards or
Covers Removed. Used When Covering
Non-Moving Hazards.
Table 2-1 DO NOT Warning Symbols
Meaning: General caution and special
attention is needed.
Meaning: High Voltage. Disconnect power
before servicing.
Meaning: Do Not Supply Inlet Water > 88°C to
the Water Inlet Valve to Reduce the Risk of
Damage. Also, Burn Hazard. Do Not Touch
Door Glass or Soap Compartments. Allow these
parts to cool before servicing.
Meaning: Do Not Operate in Any
Hazardous Classified (ATEX) Environment.
Meaning: Replace fuses with the same
type and rating.
Table 2-2 Warning and Danger Symbols
8514-301-001 REV PR
"DO NOT" WARNING SYMBOLS
WARNING AND DANGER SYMBOLS
Meaning: Do Not Step, Stand, or Sit on
This Equipment or Its Components.
Meaning: Do Not Touch Output Wires on
Controls Transformer
Meaning: There are sharp edges on various
sheet metal parts internal to the enclosure.
Use safety consciousness when placing or
moving your hands while working in the
interior of this equipment.
Meaning: Do Not Wash Items Containing
Flammable Material.
Meaning: Do Not Wash Items Containing
Explosive Material.
Meaning: Do Not Operate if Door Glass is
Damaged in Any Way.
9