Renesas RA Family
2. For example, in the Stacks tab of the configurator, the user can click to select modules to modify the
configuration settings, as required, in the Properties tab. The following screen shot illustrates modifying
the ADC driver configuration.
Note: To access the stack component properties, the view must be set to FSP Configuration
perspective, by selecting the View button, which by default will appear at the top right or the IDE.
If not visible, it may be invoked using the Open Perspectives button.
R20QS0020EG0100 Rev.1.00
Oct.22.20
Figure 16. Switch to the FSP Configurator view
Figure 17. Modifying the Configuration Settings
EK-RA2L1 – Quick Start Guide
Page 19 of 26