Read Tag - SATO GL408e User Manual

Introduction to the RFID configuration options

Read Tag

Reads the tag in range of the internal RFID coupler and reports the tag data to the debug port and
momentarily displays it on the control panel's LCD. It is mainly intended for data verification purposes.
IMPORTANT
This menu item does not position the RFID tag over the coupler. Make sure to position the tag
over the coupler to receive an accurate reading.
Read Tag & Eject
IMPORTANT
This menu item does not position the RFID tag over the coupler. Make sure to position the tag
over the coupler to receive an accurate reading.
The menu item works exactly the same as Read Tag (above), except that after the printer reads the tag,
it feeds the label to the next top-of-form.
Comm Retry
Selects the number of automatic (internal) retries that the printer will attempt on the same tag before
declaring a tag error and performing the Error Handling mode selected (Overstrike, Stop, or None).
The default value is 2.
Display F/W-Ver
Displays the reader firmware version on the control panel's LCD.
Overstrike Style
Selects the style of the overstrike pattern. The default is Grid.
For the Grid option, a grid pattern is printed during overstrikes. For the Error Type Msg option, an error
message is printed to indicate which error occurred.
12